Karya
Judul/Title Load displacement simulation of CP-Ti/UHMWPE hip implant
Penulis/Author Dr. Handoko, S.T., M.T. (1) ; Dr. Suyitno, S.T., M.Sc. (2); Ir. Rini Dharmastiti, M.Sc., Ph.D., IPM., ASEAN Eng. (3); dr. Rahadyan Magetsari, Sp.OT(K)., FICS., Ph.D. (4)
Tanggal/Date 11 2021
Kata Kunci/Keyword
Abstrak/Abstract Hip implant made from titanium is special due to its lower modulus of elasticity to avoid stress shielding with the human bone. One type of load the material designed to withstand is a gradually increased compressive force which happened when the patient change his/her position from sitting to standing. This study examined the capability of a metal on polymer (MOP) implant made from commercially pure titanium (CP-Ti) and ultra-high molecular weight polyethylene (UHMWPE) loaded up to 3 kN according to ISO 14242 standard. Two CP-Ti/UHMWPE MOP models with femoral diameter of 22 mm and 32 mm were simulated with finite element. The results expressed in load displacement curves were validated with compressive load experimental tests. Both materials are capable to withstand the load. Simulation data are in good agreement with the experiments.
Rumpun Ilmu Teknik Mesin (dan Ilmu Permesinan Lain)
Bahasa Asli/Original Language English
Level Nasional
Status
Dokumen Karya
No Judul Tipe Dokumen Aksi
1Bukti submit Handoko-Universitas Gadjah Mada Mail - [JMPB] Submission Acknowledgement.pdfBukti Submitted
2Handoko JMPB 2021 terbit 366-1434-3-PB.pdfBukti Published
3Handoko 2021 JMPB 366-1434-3-PB.pdf[PAK] Full Dokumen
4Turnitin Load displacement simulation of CP-Ti_UHMWPE hip implant (1).pdf[PAK] Cek Similarity
5Penelitian 2021 Handoko Load displcament JMPB Bukti korespodensi.pdf[PAK] Bukti Korespondensi Penulis