ACADSTAFF UGM
| Title | : | Physical Evaluation of PVA/Chitosan Film Blends with Glycerine and Calcium Chloride |
| Author | : |
Dr.Sc. Ari Dwi Nugraheni, S.Si., M.Si. (1) DIKI PURNAWATI (2) Dr.Eng. Ahmad Kusumaatmaja, S.Si., M.Sc. (3) |
| Date | : | 0 2018 |
| Keyword | : | calcium chloride,chitosan,Drop casting,plasticizer,PVA calcium chloride,chitosan,Drop casting,plasticizer,PVA |
| Abstract | : | PVA/chitosan film has been fabricated by using drop casting method. PVA/chitosan film is produced by dissolving 2% (w/v) PVA solution and 2% (w/v) chitosan solution. PVA/chitosan film is produced with weight ratio variation (w/w) 100/0, 75/25, 50/50 and 0/100. The film is fabricated using drop casting method in Petry dish with diameter 11 cm at room temperature and RH 50%-60% during seven days. The mechanical properties were characterized by using Universal Technical Machine (UTM) and UV-Vis to understand the physical properties of weight ratio (w/w) of PVA/Chitosan film by addition of plasticizer and calcium chloride. The film thickness tends to decrease with PVA content. The addition of chitosan will increase film thickness, and it will decrease swelling index, elongation (%), and transmittance of UV rays. The additions of plasticizer to PVA/Chitosan film will increase film thickness and elongation (%), and it will decrease swelling index, tensile strength and transmittance of UV rays. The crosslink of PVA/Chitosan film with calcium chloride will decrease film thickness, swelling index, elongation (%) and transmittance of UV rays, and increase tensile strength. |
| Group of Knowledge | : | Fisika |
| Original Language | : | English |
| Level | : | Nasional |
| Status | : |
Published
|